K-II EMF Detector

The K-II EMF Detector is a compact and easy to use Magnetic Field Strength Meter. 

The unit can be used indoors or outdoors for measuring any electric device or power lines.

There are 5 LED's each represents a field strength.

With your new EMF Safe Range Meter you can measure the EMF strength of every electrical device in your home, workplace or school easily and quickly--there are no time wasting chart references.  The K-II EMF Meter lets you know the results instantly!

Take unlimited readings of outdoor power lines and underground lines.  You can use your new EMF Meter when travelling and even when you are shopping for appliances. 

I used the K-II EMF Meter to test the EMF emission of several Microwave ovens and I was shocked by the difference in readings between brands.


EMF Meters





Hold your K-II EMF Detector with your thumb on the switch

Point it towards the Electromagnetic Field source, the depress and hold down the switch--a short flash will occur on the LED

The LED will indicate the range of the EMF

Moving the EMF detector from side to side or rotating it may change the reading; the highest reading is the most accurate.

Move the EMF Detector closer or further away from the EMF source to determine the "Normal" Zone as indicated by the green LED (see below for an example).

Your EMF Detector comes with a useful Exposure Log Template.  Use this template to record your initial EMF Radiation readings.  Revisit the areas you tested periodically as EMF Radiation strength can change.

If the GREEN LED does not light when you press the button, the battery is low.

To change the battery carefully remove the two screws in the back of the unit and replace the 9V battery.  Do not pull at the battery lead wires and do not over tighten the screws when reassembling the unit.




EMF Level Zone 1

GREEN - Normal Zone. 

0 to 15 milliGAUSS

This indicates a normal background electromagnetic field


EMF Level Zone 2

GREEN - Low Zone. 

1.5 to 2,5 milliGAUSS

This indicates a low level electromagnetic field


EMF Level Zone 3

YELLOW - Caution Zone. 

2.5 to 10 milliGAUSS

This indicates a mid level electromagnetic field

EMF Level Zone 4

ORANGE - High Zone. 

10 to 20 milliGAUSS

This indicates a level electromagnetic field


EMF Level Zone 5

RED - Warning Zone. 

 20 > milliGAUSS

This indicates an Extremely high level electromagnetic field




See the EMF Meter in Action -- Click Here!




A Division of Safecity
Services Pty Ltd ABN 11 055 464 581 ML #403546788
Electromagnetic Field EMF Meter - made in USA - High Quality - Reliable - Accurate - Inexpensive

 Safecity is a wholly owned and operated Australian company, distributor for the EMF Meter K-II and the Dog Dazer products